Choosing between ebike motor, controller, and display parts is not one-size-fits-all. A rider replacing a damaged screen has a different decision from one who wants to convert a manual bike into an electric bike. The four options span from a $38.99 M6C panel screen to a $261.69 front-wheel conversion kit, so the right pick comes down to how much of the system you need to add or replace.
Quick take
If you need a full front-wheel electrification package, the complete front-wheel conversion kit is the route to take. If you are upgrading a controller and its display together, the controller component kit pairs the two. If you already have a controller and only need a screen, the UART 2 M6C meter is the panel-screen pick. If you want a color TFT display, the Bigstone LCD C600E is the display-focused choice.
Price comparison
The table below compares prices and where they fall within the group.
| Product | Price | Price Bar |
|---|---|---|
| 36v/48v E-bike Controller Component Kit With Color Lcd Display & Pedal Assist | $79.45 | |
| Bigstone LCD C600E Display Kit Conversion EBIKE 36/48V Electric Bike Accessories | $75.99 | |
| 26 In 1500W 48V Front Wheel E-Bike Conversion Kit LCD Display Thumb Throttle | $261.69 | |
| UART 2 M6C Electric Bike LCD Display Meter E Scooter Panel Screen | $38.99 |
Decision matrix
- For a full front-wheel conversion project: the front-wheel conversion kit
- For a controller and display in one order: the controller component kit
- For a display-only screen swap or e-scooter panel: the UART 2 M6C meter
- For a display upgrade on an existing ebike: the Bigstone LCD C600E
Product notes
36v/48v E-bike Controller Component Kit With Color Lcd Display & Pedal Assist
The 36v/48v E-bike Controller Component Kit with Color LCD Display & Pedal Assist bundles the controller and display into one purchase, which simplifies a mid-power ebike build. It is specified for 36V/48V systems with a matchable motor power range of 750-1200W, and the color LCD screen shows real-time riding data. The FOC sine wave controller is aimed at lower noise, smoother rotation, and more comfortable riding. The controller's 30±1A current rating is part of its specification, but a motor project outside the 750-1200W matchable window would not be a natural fit for this kit. If you need both control pieces together and your motor falls in that range, this kit pairs them cleanly.
Bigstone LCD C600E Display Kit Conversion EBIKE 36/48V Electric Bike Accessories
The Bigstone LCD C600E Display Kit is a display-oriented option for a rider who already has the motor and controller side sorted. It is a color TFT screen for 36/48V electric bike accessories and is listed for ATV and road bike setups. The display shows speed, distance, riding time, driving mode, current, backlight status, and error codes. The trade-off is protocol matching: different brands use different display protocols, so the screen may not pair with your controller until you confirm the protocol. If you are after a color display upgrade and can verify that handshake, this kit is a compact path.
26 In 1500W 48V Front Wheel E-Bike Conversion Kit LCD Display Thumb Throttle
The 26 In 1500W 48V Front Wheel E-Bike Conversion Kit includes the hub motor, LCD display, thumb throttle, pedal assist sensor, and brake levers in one package. The 1500W motor is built around a 48V system and a 26-inch front wheel, and the VA color LCD shows gear, speed, mileage, and battery level. The brake levers cut motor power when engaged, so the safety wiring is part of the package. The limitation is scope: this is a front-wheel conversion path, not a display add-on or a controller-only swap. If you already have a working motor and controller, this kit would be more than the job requires.
UART 2 M6C Electric Bike LCD Display Meter E Scooter Panel Screen
The UART 2 M6C Electric Bike LCD Display Meter is the lowest-priced item in this set and works as a panel screen for an ebike or e-scooter project. It uses the UART2 protocol and the M6C-5PIN model, with a display that supports full vertical angle adjustment and shows battery level, headlight status, walk mode, PAS level, speed, trip/odometer, running time, mile/km, and error warnings. Multiple holder sizes cover different handlebar or bar options. The important limitation is protocol: if your controller does not speak UART2, the display may not work properly. This is a display-only part, so you still need a compatible controller in the loop.
Final recommendation
Use the full front-wheel conversion kit when you want to turn an existing bike into an electric bike and prefer one package with motor, display, throttle, pedal assist, and brake levers. Choose the controller component kit with color LCD display and pedal assist when your build already has a motor in the 750-1200W range and you need the controller and display together. Pick the Bigstone LCD C600E when you only need a display upgrade and can confirm the protocol match. Go with the UART 2 M6C meter when you want the lower-priced panel screen and your controller uses UART2.
